Referred Journals

Referred Journals

 

  1. J. Megusar, E.J. Lavernia, P. Domalavage, O.K. Harling and N.J. Grant, “Structures and Properties of Rapidly Solidified 9 Cr-1 Mo Steel”, Journal of   Nuclear Materials, 122 & 123, pp. 789-793, 1984.
  2. G. Rai, E.J. Lavernia and N.J. Grant, “Factors Influencing the Powder Size and   Distribution in Ultrasonic Gas Atomization”, Journal of Metals, Vol. 37, No. 8,   pp. 22-26, August 1985.
  3. E.J. Lavernia, B. Poggiali, I. Servi, J.P. Clark, F. Katrak and N.J. Grant, “Rapidly Solidified Aluminum Alloys:  A Market Assessment”, Metal Powder   Report, Vol. 4, pp. 272-279, April 1986.
  4. E.J. Lavernia, G. Rai and N.J. Grant, “Liquid Dynamic Compaction of a Rapidly   Solidified 7075 Aluminum Alloy Modified with 1% Ni and 0.8% Zr”, International   Journal of Powder Metallurgy, Vol. 22, No. 1, pp. 9-16, 1986.
  5. E.J. Lavernia, G. Rai and N.J. Grant, “R.S. 7XXX Alloys:  A Review”, Journal of Materials Science and Engineering, Vol. 79, No. 2, pp. 211-221, 1986.
  6. K. Ogata, E.J. Lavernia, G. Rai and N.J. Grant, “Structure and Properties of a   Rapidly Solidified Superalloy Produced by Liquid Dynamic Compaction”,    International Journal of Rapid Solidification, Vol. 2, No. 1, pp. 21-35, 1986.
  7. T.S. Chin, Y. Hara, E.J. Lavernia, R.C. O’Handley and N.J. Grant, “(Fe Co)- Nd-B Permanent Magnets by Liquid Dynamic Compaction”, Journal of Applied   Physics, Vol. 59, No. 4, pp. 1297-1300, 1986.
  8. S. Tanigawa, Y. Hara, E.J. Lavernia, T.S. Chin, R.C. O’Handley and N.J. Grant, “Fe-Nd-B Permanent Magnets Made by Liquid Dynamic Compaction”, IEEE   Trans. Magn., MAG-22, No. 5, p. 746, 1986.
  9. E.J. Lavernia and N.J. Grant, “Structure and Properties of a Modified 7075   Aluminum Alloy Produced by Liquid Dynamic Compaction”, International Journal   of Rapid Solidification, Volume 2, No. 2, pp. 93-106, 1986.
  10. E.J. Lavernia and N.J. Grant, “Aluminum Lithium Alloys:  A Review”, Journal of Materials Science, Vol. 22, pp. 1521-1529, 1987.
  11. E.J. Lavernia, E. Gomez and N.J. Grant, “The Structure and Properties of Mg-Al-  Zr and Mg-Zn-Zr Alloys Produced by Liquid Dynamic Compaction”, Journal of  Materials Science and Engineering, Volume 95, pp. 225-236, 1987.
  12. T. Ando, E.J. Lavernia and N.J. Grant, “A TEM Study of Modified 7075 and   X2020 Aluminum Alloys Produced by Liquid Dynamic Compaction”, Materials Letters, Vol. 5, No. 1, 2, pp. 17-28, December 1986.
  13. E.J. Lavernia, B. Poggiali, I. Servi, J.P. Clark, F. Katrak and N.J. Grant,  “Rapidly Solidified Aluminum Alloys:  A Market Assessment”, International   Journal of Powder Metallurgy, Vol. 23, No. 1, pp. 55-60, January 1987.  (Also   reprinted as #J3)
  14. J. Jacob, J. Schoenung, E.J. Lavernia, J. Clark, and N.J. Grant, “Economic Cost   Modeling of the Gas Atomization Process”, Journal of Metals, Volume 39, No. 10,   pp. 19-21, October 1987.
  15. M. Veistinen, E.J. Lavernia, M. Abinante and N.J. Grant, “Effects of Geometry and Position of the Metal Delivery Tube on  Ultrasonic Gas Atomization”, Materials Letters, Volume 5, No. 10, pp. 373-379, September 1987.
  16. E.J. Lavernia and N.J. Grant, “Spray Deposition of Metals:  A Review”, Journal of  Materials Science and Engineering, Volume 98, pp. 381-394, 1988.
  17. M. Veistinen, E.J. Lavernia, J. Baram and N.J. Grant, “Jet Behavior During   Ultrasonic Gas Atomization”, International Journal of Powder Metallurgy, Volume 25/2, pp. 89-92, April 1989.
  18. E.J. Lavernia, E. Gutierrez, J. Szekely and N.J. Grant, “A Mathematical Model of   the Liquid Dynamic Compaction Process, Part 1:  Heat Flow in Gas Atomization”,   International Journal of Rapid Solidification, Vol. 4, pp. 89-124, 1988.
  19. E. Gutierrez, E.J. Lavernia, G. Trapaga and J. Szekely, “A Mathematical Model of   the Liquid Dynamic Compaction Process, Part 2:  Formation of the Deposit”,   International Journal of Rapid Solidification, Vol. 4, pp. 125-150, 1988.
  20. E. Gutierrez, E.J. Lavernia, G. Trapaga, J. Szekely and N.J. Grant, “A    Mathematical Model of the Spray Deposition Process”, Metallurgical Transactions,   Volume 20A, pp 71-85, January 1989.
  21. J. Baram, M.K. Veistinen, E.J. Lavernia, M. Abinante and N.J. Grant, “Pressure Build Up at the Metal Delivery Tube in Ultrasonic Gas Atomization”,   Journal of Materials Science, Vol. 23, pp. 2457-2463, 1988.
  22. E.J. Lavernia and J. Baram, “On Quenching Rates, Secondary Dendrite Arm   Spacings and Particle Sizes in Gas Atomization”, Journal of Materials Science   Letters, 8, pp. 612-614, 1989.
  23. M. Ruhr, I. Ucok, E. J. Lavernia and J. Baram, “Metastable Phases and    Microstructure of a Rapidly Solidified Al-Li-Mn-Zr Alloy for High Temperature Applications”, Israel Journal of Technology, Vol. 24, pp. 157-165, 1988.
  24. K.T. Park, E.J. Lavernia and F.A. Mohamed, “The Stress Dependence of Creep   Rate in Silicon Carbide Particulate Reinforced 6061 Aluminum”, Israel Journal of   Technology, Vol. 24, pp. 369-374, 1988.
  25. E.J. Lavernia, “The Evolution of the Microstructure During Spray Atomization and   Deposition”, Israel Journal of Technology, Vol. 24, pp. 79-86, 1988.
  26. E.J. Lavernia, T. Srivatsan and F. Mohamed, “Strength, Deformation, Fracture   Behavior and Ductility of Aluminum-Lithium Alloys:  A Review”, Journal of Materials Science,  Vol. 25, pp. 1137-1158, 1990.
  27. E.J. Lavernia, “The Evolution of the Microstructure During Spray Atomization and   Deposition”, International Journal of Rapid Solidification, Vol. 5, pp. 47-85, 1989.
  28. J. Marinkovich, F.A. Mohamed, J.R. Pickens and E.J. Lavernia, “The Spray   Atomization and Deposition of Weldalite 049”, Journal of Metals, Vol. 41, No. 9,   pp. 36-41, September 1989.
  29.  M. Ruhr, E.J. Lavernia and J. Baram, “Extended Al (Mn) Solution in a Rapidly   Solidified Al-Li-Mn-Zr Alloy”, Metallurgical Transactions, Vol. 21A, pp. 1785-1789, June 1990.
  30. M. Gupta, F.A. Mohamed and E.J. Lavernia, “Solidification Behavior of Al-Li-SiCp MMCs Processed Using Variable Co-Deposition of Multi-Phase   Materials”, Journal of Materials and Manufacturing Processes, Vol. 5, No. 2, pp.165-196, 1990.
  31.  I. Ibrahim, F.A. Mohamed and E.J. Lavernia, “Particulate Reinforced Metal Matrix   Composites:  A Review”, Journal of Materials Science, Vol. 26, pp.1137-1156, 1991.
  32. T.S. Srivatsan and E.J. Lavernia, “The Effects of Oxides on the Properties of Al-Li Alloys”, Journal of Materials Science Letters, Vol. 9, pp. 888-891, 1990.
  33. K.T. Park, E.J. Lavernia and F.A. Mohamed, “Creep Behavior and Substructure in an Al-Li Alloy”, Acta Metallurgica et Materialia, Vol. 38, No. 10, pp. 1837- 1848, 1990.
  34. T.S. Srivatsan, E.J. Lavernia, and F.A. Mohamed, “The Influence of Oxides on Powder-Metallurgy Aluminum-Lithium-Copper Alloys”, International Journal of Powder Metallurgy, Vol. 26, No. 4, pp. 321-334, 1990.
  35. T.S. Srivatsan and E.J. Lavernia, “The Presence and Consequences of Precipitate Free Zones in an Aluminum-Copper-Lithium Alloy “, Journal of Materials Science, Vol. 26, pp. 940-950, 1991.
  36. K.T. Park, E.J. Lavernia and F.A. Mohamed, “High Temperature Creep of SiC Particulate Reinforced Aluminum”, Acta Metallurgica et Materialia, Vol. 38, No. 11, pp. 2149-2159, 1990.
  37. T.S. Srivatsan, M. Gupta, F. Mohamed and E.J. Lavernia, “Microstructure of a Spray Deposited Aluminum-Copper-Lithium Alloy”, Aluminum an International Journal, Vol. 68, No. 6, pp. 500-505, 1992.
  38. E.J. Lavernia, J.A. Ayers and T.S. Srivatsan, “Rapid Solidification Processing with Specific Application to Aluminum Alloys”, International Materials Reviews, Vol. 37, No. 1, pp. 1-44, 1992.
  39. M. Gupta, F. A. Mohamed and E.J. Lavernia, “Wetting and Interfacial Reactions in Al-Li-SiCp MMCs Processed by Spray Atomization and Deposition”, Journal of Materials Science, Vol. 26, pp. 6673-6684, 1991.
  40. E.J. Lavernia, E. Gutierez and J. Baram, “Precipitation and Excess Solid Solubility in Mg-Al-Zr and Mg-Zn-Zr Processed by Spray Atomization and Deposition”, Journal of Materials Science and Engineering, Vol. A132, pp. 119-133, 1991.
  41. M. Gupta, F. A. Mohamed and E.J. Lavernia, “The Effects of Solidification Phenomena on the Distribution of Ceramic Reinforcements during Spray Atomization and Co-Deposition”, International Journal of Rapid Solidification, Vol. 6, pp. 247-284, 1991.
  42. T. Chanda, E.J. Lavernia and J. Wolfenstine, “Hot Deformation of Particulate Reinforced Al-4Li-1Mg-0.5Ge-0.2Zr”, Scripta Metallurgica et Materialia, Vol. 25, pp. 131-135, 1991.
  43. X. Liang and E.J. Lavernia , “On the Dendrite-Equiaxed Grain Transition in Atomized Ni3Al Powders”, Scripta Metallurgica et Materialia, Vol. 25, pp. 1199-1204, 1991.
  44. T.S. Srivatsan, I. Ibrahim, F.A. Mohamed and E.J. Lavernia, “Processing Techniques for Particulate Reinforced Metal Matrix Composites”, Journal of
  45.  Materials Science, Vol. 26, pp. 5965-5978, 1991.
  46.  X. Zeng and E.J. Lavernia, “Interfacial Behavior during Spray Atomization and Co-Deposition”, International Journal of Rapid Solidification, Vol. 7, pp. 219-243, 1993.
  47. T.S. Srivatsan, R. Auradkar, E.J. Lavernia, and A. Prakash, “High Strain Cyclic Fatigue and Fracture Behavior of A SiC Reinforced Cast Aluminum Alloy Composite”, accepted for publication, Materials Transactions, Japan Institute of Metals, Vol. 32, No. 5, pp. 473-479, 1991.
  48. X. Zeng, H. Liu, M. Chu, and E.J. Lavernia, “An Experimental Investigation of Reactive Spray Atomization and Deposition Processing of Ni3Al/Y2O3 Using N2-O2 Atomization”, Metallurgical Transactions A, Vol. 23A, pp. 3394-3399, 1993.
  49. Y. Wu and E.J. Lavernia, “Spray Atomization and Codeposited 6061 Al/SiCp Composites”,Journal of Metals, Vol. 43, No. 8, pp. 16-23, August 1991.
  50. F. Mohamed, K.T. Park, and E.J. Lavernia, “Creep Behavior of Discontinuous SiC-Al Composites”, Materials Science and Engineering A, Vol. A150, pp. 21-35, 1992.
  51. M. Gupta, F.A. Mohamed, and E.J. Lavernia, “Heat Transfer Mechanisms and their Effect on Microstructure during Spray Atomization and Co-Deposition of Metal Matrix Composites”, Materials Science and Engineering A, Vol. A144, pp. 99-110, 1991.
  52.  M. Gupta, F.A. Mohamed, and E.J. Lavernia, “The Effect of Ceramic Reinforcements During Spray Atomization and Co-Deposition of Metal Matrix Composites: Part I: Heat Transfer”, Metallurgical Transactions A, Vol. 23A, pp. 831-843, 1992.
  53. M. Gupta, F.A. Mohamed, and E.J. Lavernia, “The Effect of Ceramic Reinforcements During Spray Atomization and Co-Deposition of Metal Matrix Composites: Part II: Solid State Cooling Effects”, Metallurgical Transactions A, Vol. 23A, pp. 845-849, 1992.
  54. H. Kim, J.C. Earthman, and E.J. Lavernia, “Directional Solidification of Ni3Al”, Acta Metallurgica et Materialia, Vol. 40, No. 4, pp. 637-642, 1992.
  55.  M. Gupta, J. Juarez-Islas, W.E. Frazier, F.A. Mohamed, and E.J. Lavernia, “Microstructure, Excess Solid Solubility and Elevated Temperature Behavior of Spray Atomized and Co-Deposited Al-Ti-SiC”, Metallurgical Transactions B, Vol. 23B, pp. 719-736, 1992.
  56. X. Liang, J. Wolfenstine, J.C. Earthman and E.J. Lavernia, “A Comparison of Techniques for Determining the Volume Fraction of Particulates in Metal Matrix Composites”, Materials Characterization, Vol. 28, pp. 173-178, 1992.
  57. T.S. Srivatsan and E.J. Lavernia, “Use of Spray Techniques to Synthesize Particulate Reinforced Metal Matrix Composites”, Journal of Materials Science, Vol. 27, pp. 5965-5981, 1992.
  58.  H.K. Kim, J.C. Earthman and E.J. Lavernia, “Primary Dendrite Arm Spacing and Tip Radii in Directionally Solidified Ni3Al”, Materials Science and Engineering, A152, pp. 240-246, 1992.
  59. X. Liang and E.J. Lavernia, “Interfacial Behavior in Ni3Al/TiB2 Intermetallic Matrix Composite”, Materials Science and Engineering, A153, pp. 654-661, 1992.
  60. X. Liang, J.C. Earthman and E.J. Lavernia, “Microstructure and Elevated Temperature Behavior of Ni3Al/TiB2 Intermetallic Matrix Composite”, Materials Science and Engineering, A153, pp. 646-653, 1992.
  61.  M. Gupta, C. Lane and E.J. Lavernia, “Microstructure and Properties of Spray Atomized and Deposited Al-7Si/SiCp Metal Matrix Composites”, Scripta Metallurgica et Materialia, Vol. 26, pp. 825-830, 1992.
  62.  M. Gupta, F. A. Mohamed and E.J. Lavernia, “Solidification Characteristics of Atomized Al-Ti Powders”, Scripta Metallurgica et Materialia, Vol. 26, pp. 697-702, 1992.
  63. H. Kim, E.J. Lavernia, and J.C. Earthman, “Mechanisms of Intergranular Cavity Growth in Ni3Al (Zr, B)”, Acta Metallurgica et Materialia, Vol. 40, No. 8, pp. 1933-1943, 1992.
  64. E.J. Lavernia, T.S. Srivatsan and R.H. Rangel, “Atomization of Alloy Powders”, Journal of Atomization and Sprays, Vol. 2, pp. 253-274, 1992.
  65. J. Zhang, R. Perez, and E.J. Lavernia, “Dislocation Induced Damping in Metal Matrix Composites”, Journal of Materials Science, Vol. 28, pp. 835-846, 1993.
  66. X. Liang, J.C. Earthman and E.J. Lavernia, “On The Mechanism of Grain Formation During Spray Atomization and Deposition” Acta Metallurgica et Materialia, Vol. 40, No. 11, pp. 3003-3016, 1992.
  67. Y. Wu and E.J. Lavernia, “Strengthening Behavior of Particulate Reinforced Metal Matrix Composites”, Scripta Metallurgica et Materialia, Vol. 27, pp. 173-178, 1992.
  68. Y. Wu and E.J. Lavernia, “Interaction Mechanisms between Ceramic Particles and Atomized Metallic Droplets”, Metallurgical Transactions A, Vol. 23A, pp. 2923-2937, 1992.
  69.  M. Wu, T.S. Srivatsan, J.R. Pickens and E.J. Lavernia, “Microstructure and Mechanical Properties of Spray Deposited Al-Cu-Li-Ag-Mg-Zr, Scripta Metallurgica et Materialia, Vol. 27, pp. 761-766, 1992.
  70. J. Zhang, M. Gungor, and E.J. Lavernia, “The Effect of Porosity on the Microstructural Damping Response of 6061 Aluminum Alloy”, Journal of Materials Science, Vol. 28, pp. 1515-1524, 1993.
  71. R. Perez, J. Zhang, and E.J. Lavernia, “Strain Amplitude Dependence of 6061 Al MMCs”, Scripta Metallurgica et Materialia, Vol. 27, pp. 1111-1114, 1992.
  72. M. Gupta, T.S. Srivatsan, F.A. Mohamed and E.J. Lavernia, “Microstructural Evolution and Mechanical Properties of SiC/Al2O3 Particulate Reinforced Spray Deposited Metal Matrix Composites”, Journal of Materials Science, Vol. 28, pp. 2245-2259, 1993.
  73. G. Solovioff, E.J. Lavernia, and D. Eliezer, “Hydrogen Effects in Al-2.3Ti-SiCp Metal Matrix Composites” Materials Science and Engineering, Vol. 159, pp. 237-242, 1992.
  74. R. Perez, J. Zhang, M. Gungor and E.J. Lavernia, “Damping Behavior of 6061 Al/Gr MMCs”, Metallurgical Transactions A, Vol. 24A, pp. 701-712, 1993.
  75. X. Liang and E.J. Lavernia, “Analysis of Microstructure Evolution during Spray Atomization and Deposition”, Materials Science and Engineering, Vol A161, pp. 221-235, 1993.
  76. J. Zhang, R. Perez, M. Gupta, and E.J. Lavernia, “Damping Behavior of Particulate Reinforced 2519 Al Metal Matrix Composites”, Scripta Metallurgica et Materialia, Vol. 28, pp. 91-96, 1993.
  77. C. San Marchi, H. Liu, E. Muehlberger, A. Sickinger, E.J. Lavernia and R.H. Rangel, “Numerical Analysis of the Deformation and Solidification of a Single Droplet Impinging onto a Flat Substrate”, Journal of Materials Science, Vol. 28, pp. 3313-3321, 1993.
  78. Y.L. Jeng, J. Wolfenstine, D.E. Bailey, A. Sickinger and E.J. Lavernia, “Low Pressure Plasma Deposition of SiC-Reinforced MoSi2”, Scripta Metallurgica et Materialia, Vol. 28, pp. 453-458, 1993.
  79. J. Zhang, R. Perez, and E.J. Lavernia, “Documentation of the Damping Capacity of Metals, Ceramics and Composite Materials”, Journal of Materials Science, Vol. 28, pp. 2395-2404, 1993.
  80. T.S. Srivatsan and E.J. Lavernia, “Effects of Microstructure on the Strain-Controlled Fatigue Failure Behavior of an Aluminum-Alloy/Ceramic Particle Composite”, Composites Science and Technology, an International Journal, Vol. 49, pp. 303-313, 1993.
  81. Y. Wu and E.J. Lavernia, “Reply to Comment on Strengthening Mechanisms in Discontinuously Reinforced Metal Matrix Composites”, Scripta Metallurgica et Materialia, Vol. 28, p. 541, 1993.
  82. T.S. Srivatsan, T.S. Sudarshan, D.P. Harvey and E.J. Lavernia, “Mechanisms of Deformation and Strengthening in Wrought Aluminum Alloys”, Metals, Materials, and Processes, Vol. 4, No. 4, pp. 259-286, 1993.
  83. J. Shih, J. Wu and E.J. Lavernia, “Coarsening Behavior of Primary Si”, Scripta Metallurgica et Materialia, Vol. 29, pp. 31-36, 1993.
  84. M. Gupta, K. Bowo, E.J. Lavernia and J.C. Earthman, “Effect of Particulate Type on Fatigue Crack Propagation in Al-Li Based Spray Deposited Composites”, Scripta Metallurgica et Materialia, Vol. 28, pp. 1053-1058, 1993.
  85. Y.L. Jeng, E.J. Lavernia, J. Wolfenstine, D.E. Bailey and A. Sickinger, “Creep Behavior of Plasma Sprayed SiC-Reinforced MoSi2”, Scripta Metallurgica et Materialia, Vol. 29, pp. 107-111, 1993.
  86.  X. Liang and E.J. Lavernia, “Residual Stress Distribution in Spray Atomized and Deposited Ni3Al”, Scripta Metallurgica et Materialia, Vol. 29, pp. 353-358, 1993.
  87.  H. Liu, E.J. Lavernia and R.H. Rangel, “Numerical Simulation of Substrate Impact and Freezing of Multiple Droplets in Plasma Spray Processes”, Journal of Physics D: Applied Physics, Vol. 26, pp. 1900-1908, 1993.
  88. J. Zhang, R. Perez, and E.J. Lavernia, “Effect of SiC and Graphite on the Damping Behavior of Metal Matrix Composites”, Acta Metallurgica et Materialia, Vol. 42, N0. 2, pp. 395-409, 1994.
  89. Y. Wu, H. Liu, and E.J. Lavernia, “Solidification Behavior of Al-Si/SiC MMCs During Wedge-Mold Casting”, Acta Metallurgica et Materialia, Vol. 42, No. 3, pp. 825-837, 1994.
  90. H. Liu, X. Zeng and E.J. Lavernia, “Processing Maps for Reactive Atomization and Deposition Processing”, Scripta Metallurgica et Materialia, Vol. 29, pp. 1341-1344, 1994.
  91. H. Liu, E.J. Lavernia and R.H. Rangel, “Numerical Simulation of Impingement of Molten Ti, Ni and W Droplets on a Flat Substrate”, Journal of Thermal Spray Technology, Vol. 2(4), pp. 369-378, 1994.
  92. D. Baskin, J. Wolfenstine and E.J. Lavernia, “Elevated Temperature Mechanical Behavior of CoSi & Particulate Reinforced CoSi Produced by Spray Deposition”, Journal of Materials Research, Vol. 9, No. 2, pp. 362-371, 1994.
  93. K.T. Park, E.J. Lavernia and F.A. Mohamed, “High Temperature Deformation of 6061 Aluminum”, Acta Metallurgica et Materialia, Vol. 42, No. 3, pp. 667-678, 1994.
  94. Y. Wu , J. Zhang and E.J. Lavernia, “Modeling of the Incorporation of Ceramic Particulates in Metallic Droplets During Spray Atomization and Co-Injection”, Metallurgical Transactions B, Vol. 25B, pp. 135-147, 1994.
  95. J.L. Jeng and E.J. Lavernia, “Processing of Molybdenum Disilicide – A Review”, Journal of Materials Science, Vol. 29, pp. 2557-2571, 1994. .
  96. J.A. Juarez-Islas, R. Perez, P. Lengsfeld, and E.J. Lavernia, “Microstructural and Mechanical Evaluations of Spray-Deposited 7XXX Al Alloys after Conventional Consolidation”, Materials Science and Engineering A, Vol. A179/A180, pp. 614-618, 1994.
  97. T.S. Srivatsan and E.J. Lavernia, “Cyclic Strain Resistance of a Spray Atomized and Deposited Cast Aluminum Metal Matrix Composite”, Composites Engineering, an International Journal, Vol. 4, No. 4, pp. 459-472, 1994.
  98. W. Cai, D. Bailey, A. Sickinger, and E.J. Lavernia, “Low Pressure Plasma Deposition of W”, Journal of Thermal Spray Technology, Vol. 3, No. 2, pp. 135-141, 1994.
  99. H. Liu, E.J. Lavernia and R.H. Rangel, “Numerical Investigation of Micro-Pore Formation During Impact of Molten Droplets in  Plasma Spray Processes”, Journal of Atomization and Sprays, Vol. 4, No. 4, pp. 369-384, 1994.
  100. J. Zhang, Y. Wu and E.J. Lavernia, “Kinetics of Ceramic Particulate Penetration into Spray Atomized Metallic Droplets at Variable Penetration Depth”, Acta Metallurgica et Materialia, Vol. 42, No. 9, pp. 2955-2972, 1994.
  101. P. Lengsfeld, J. Juarez-Islas, W.A. Cassada and E.J. Lavernia, “Microstructure and Mechanical Behavior of Zn Modified 7XXX AL Alloys”, International Journal of Rapid Solidification, Vol. 8, pp. 237-265, 1995.
  102. J. Juarez-Islas, S. Su, R. Perez, B. Campillo and E.J. Lavernia, “Solid Solution of Cu in (Al-Cu)-SiCp Metal Matrix Composites by Spray Atomization and CoDeposition”, Materials Science and Engineering, Vol. A179/180, pp. 609-613, 1994.
  103. J. Wolfenstine, Y.L. Jeng and E.J. Lavernia, “Elevated Temperature Behavior of Plasma Sprayed MoSi2/SiC”, Materials Science and Engineering, vol. A189, pp. 257-266, 1994.
  104. H. Liu, R.H. Rangel and E.J. Lavernia, “Modeling of Reactive Spray Atomization and Deposition of Ni3Al”, Acta Metallurgica et Materialia, Vol. 42, No. 10, pp. 3277-3289, 1994.
  105. S. Su, X. Liang, A. Moran and E.J. Lavernia, “Solidification Behavior of an Al-Si Alloy during Spray Atomization and Deposition”, International Journal of Rapid Solidification, Vol. 8, pp. 161-177, 1994.
  106. X. Liang and E.J. Lavernia, “Evolution of Interaction Domain Microstructure during Spray Deposition”, Metallurgical Transactions , Vol. 25A, pp. 2341-2355, 1994.
  107. D. Lawrynowicz and E.J. Lavernia, “Spray Atomization and Deposition Processing of Fiber Reinforced Intermetallic Matrix Composites”, Scripta Metallurgica et Materialia, Vol. 31, No. 9, pp. 1277-1281, 1994.
  108. M. Gupta and E.J. Lavernia, “Synthesis and Microstructural Characterization of Metal Based Composite Powders”, Scripta Metallurgica et Materialia, Vol. 30, No. 11, pp. 1377-1382, 1994.
  109. D. Lawrynowicz and E.J. Lavernia, “A Review of Sensors and Techniques used to Monitor Processing Parameters during Spray Atomization”, Journal of Materials Science, Vol. 30, pp. 1125-1138, 1995.
  110. H. Liu, R.H. Rangel and E.J. Lavernia, “Modeling of Droplet-Gas Interactions in Spray Atomization of Ta-2.5W Alloy”, Materials Science and Engineering A, Vol. A191, pp. 171-184, 1995.
  111. B. Huang and E.J. Lavernia, ”  Materials Synthesis by Mechanical  Alloying”, Journal of Materials Synthesis and Processing, Vol. 3, No. 1, pp. 1-10, 1995.
  112. H. Liu, E.J. Lavernia and R.H. Rangel, “Modeling of Molten Droplet Impingement on a Non-Flat Surface”, Acta Metallurgica et Materialia, Vol. 43, No. 5, pp. 2053-2072, 1995.
  113. Y.L. Jeng, R. Hayes, J. Wolfenstine and E.J. Lavernia, “Powder Metallurgy Processing of Dual Phase Al rich Fe-Al Intermetallics”, International Journal of Powder Metallurgy, Vol. 31, No. 2, pp. 155-166, 1995.
  114. J. Zhang, R. Perez, C. Wong and E.J. Lavernia, “Effects of Secondary Phases on the Damping Behavior of Metals Alloys and Composites”, Materials Science and Engineering, Reports, Volume R13, No. 8, pp. 325-390, 1994.
  115. X. Zeng, S. Nutt and E.J. Lavernia, “Microstructural Characterization of Ni3Al Processed by Reactive Atomization and Deposition”, Metallurgical Transactions A, Vol. 26A, pp.  817-828, 1995.
  116. D. Lawrynowicz J. Wolfenstine and E.J. Lavernia S. Nutt, D. Bailey and A. Sickinger, “Reactive Synthesis and Characterization of MoSi2/SiC using Low Pressure Plasma Deposition and 100% Methane”, Scripta Metallurgica et Materialia, vol. 32, no. 5, pp. 689-693, 1995.
  117. R.W. Hayes, Y.L. Jeng, E.J. Lavernia and J. Wolfenstine, “Preliminary Characterization of the Room Temperature Fracture Behavior of Monolithic and Composite Fe-Al3-Fe2Al5”, Scripta Metallurgica et Materialia, Vol. 32, No. 3, pp. 433-437, 1995.
  118. E.J. Lavernia and X. Liang, “Spray Atomization and Deposition Processing of Metal Matrix Composites: An Overview”, Reviews in  Particulate Materials, vol. 2, pp. 3-62, 1994.
  119. Y. Wu, W.A. Cassada and E.J. Lavernia and X. Liang, “Microstructure and Mechanical Properties of Spray Deposited Al-17Si-4.5Cu-0.6Mg Wrought Alloy”, Metallurgical Transactions A, Vol. 26A, No. 5, pp. 1235-1247, 1995.
  120. X. Zeng and E.J. Lavernia, “Creep Behavior of Dispersion Strengthened Ni3Al Intermetallic Processed using Reactive Atomization and Deposition”, Scripta Metallurgica et Materialia, Vol. 32, No. 7, pp. 991-996, 1995.
  121. X. Zeng, E.J. Lavernia and J.M. Schoenung, “Solidification Behavior of Spray Atomized Silicon Droplets”, Scripta Metallurgica et Materialia, Vol. 32, No. 8, pp. 1203-1208, 1995.
  122. H.Y. Tong, F.G. Shi, and E.J. Lavernia, “Enhanced Oxidation Resistance of Nanocrystalline FeBSi Materials”, Scripta Metallurgica et Materialia, Vol. 32, No. 4, pp. 511-516, 1995.
  123. H. Liu, E.J. Lavernia and R.H. Rangel, “An Analysis of Freeze-Up Phenomena During Gas Atomization of Metals”, International Journal of Heat and Mass Transfer, V38, No. 12, August, pp. 2183-2193, 1995.
  124. E.J. Lavernia, R.J. Perez and J. Zhang “Damping Behavior of Discontinuously Reinforced Al Alloy Metal Matrix Composites”, Metallurgical Transactions A, Vol. 26A, November, pp. 2803-2818, 1995.
  125. D.H. Shin, K.T.Park, and E.J. Lavernia, “High Temperature Deformation in a Superplastic 7475 Al Alloy with a Relatively Large Grain Size”, Materials Science and Engineering A, Vol. A201, pp. 118-126 , 1995.
  126. X. Liang, E.J. Lavernia, J. Wolfenstine and A. Sickinger “Microstructure Evolution during Reactive Plasma Spraying of MoSi2 with Methane”,Journal of Thermal Spray Technology, Vol. 4 (3), September, pp. 252-260, 1995.
  127. T.S. Srivatsan, T.S. Sudarshan and E.J. Lavernia, “Processing of Discontinuously Reinforced Metal Matrix Composites by Rapid Solidification”, accepted for publication, Progress in Materials Science, Vol. 39, Numbers 4/5, 1995.
  128. M. Gupta and E.J. Lavernia, “Effect of Preparation Methods on the Incorporation/Distribution of Ceramic Particulates in Metal Based Composite Powders”, Materials Transactions, JIM, Vol. 36, No. 3, pp. pp. 451-457, 1995.
  129. S.P. Yan, F.A. Mohamed, T.S. Srivatsan and E.J. Lavernia, “Influence of Spray Atomization and Deposition Processing on Microstructure and Mechanical Behavior of an Aluminum Alloy Metal Matrix Composite”, Journal of Materials Science, Vol. 30, pp. 4726-4736, 1995.
  130. Y.L. Jeng, E.J. Lavernia, R.M. Hayes and J. Wolfenstine, “Creep Behavior of Al-Rich Fe-Al Intermetallics”, Materials Science and Engineering, Vol. A192/193, pp. 240-248, 1995.
  131. B. Huang, R. Perez, P. Crawford, A Sharif, S. Nutt and E.J. Lavernia, “Mechanically Induced Crystallization of MetGlas Fe7B13Si9 during Cryogenic High Energy Ball Milling”, NanoStructured Materials, Vol. 5, No. 5, June-July, pp. 545-554, 1995.
  132. W.D. Cai, Y. Li, R.J. Dowding, F.A. Mohamed and E.J. Lavernia, “A Review of Tungsten-Based Alloys as Kinetic Energy Penetrator Materials”, Reviews in  Particulate Materials, Vol. 3, pp. 71-142, 1995.
  133. B. Huang, R. Perez, P. Crawford, S. Nutt and E.J. Lavernia, “The Synthesis of Nanocrystalline Fe78B13Si9 by Cryogenic High Energy Ball Milling of Metals”, NanoStructured Materials, Vol. 7, No. 1/2, pp. 57-66, 1996.
  134. R. Perez, B. Huang, P. Crawford, A Sharif and E.J. Lavernia, “Synthesis of Nanocrystalline Fe78B13Si9 by Mechanical Alloying”, Materials Science and Engineering, A204, pp. 217-221, 1995.
  135. R. Perez, B. Huang, P. Crawford, A Sharif and E.J. Lavernia, “The Synthesis of Nanocrystalline Fe-B-Si Powders”, NanoStructured Materials, Vol. 7, No. 1/2, pp. 47-56, 1996.
  136. B. Huang, R. Perez, E.J. Lavernia, and M.J. Luton, “Formation of Supersaturated Solid Solutions by Mechanical Alloying”, NanoStructured Materials, Vol. 7, No. 1/2, pp. 67-80, 1996.
  137. S. Ho and E.J. Lavernia, “Thermal Residual Stresses in Metal Matrix Composites”, Journal of Applied Composite Materials,  Vol. 2, No. 1, pp. 1-30, 1995.
  138. B. Li, X. Liang, J. C. Earthman and E.J. Lavernia, “Two Dimensional Modeling of Momentum and Thermal Behavior during the Atomization of ?-TiAl”, Acta Metallurgica et Materialia, Vol. 44, No. 6, pp. 2409-2420, 1996.
  139. S. Ho and E.J. Lavernia, “Thermal Residual Stresses in Spray Atomized and Deposited Ni3Al”, Scripta Metallurgica et Materialia, Vol. 34, No. 4, pp. 527-536, 1996.
  140. M. Gupta, Y. Li, and Y. Wu and E.J. Lavernia, “DSC Analysis of the effect of Processing Technique on the Dissolution/Precipitation Reactions in a Hypereutectic Al-Si Alloy”, Journal of Thermal Analysis, Vol. 44, pp. 1321-1331, 1995.
  141. Y. Wu, L. Del Castillo and E.J. Lavernia, “Superplasticity of 5083 Alloys Produced by Spray Atomization and Deposition”, Scripta Metallurgica et Materialia, Vol. 34, No. 8, pp. 1243-1249, 1996.
  142. M. Gupta and E.J. Lavernia, “Effect of Atomization on the Distribution of SiC Particulates in Spray deposited Al-7Si/SiC Metal Matrix Composites”, Journal of Materials Science Letters, Vol. 14, pp. 1543-1545, 1995.
  143. Q. Zhang, R.H. Rangel and E.J. Lavernia, “Nucleation Phenomena during Co-Injection of Ceramic Particulates into Atomized Ceramic Droplets”, Acta Metallurgica et Materialia, Vol. 44, No. 9, pp. 3696-3703, 1996.
  144. Y. Wu, X. Zeng, E.J. Lavernia and J.M. Schoenung, “Reactive Atomization of Silicon to Form In-Situ Oxide Sintering Aids”, Metallurgical and Materials Transactions, Vol. 27A, No. 8, pp. 2115-2121, 1996.
  145. J.P. Delplanque, E.J. Lavernia, and R.H. Rangel, “Multi-Directional Solidification Model for the Description of Micro-pore Formation in Spray Deposition Processes”, International Journal of Numerical Heat Transfer, Part A, 30:1-18, 1996.
  146. J. Ho and E.J. Lavernia, “Thermal Residual Stresses in Functionally Graded and Layered 6061 Al/SiC”, Metallurgical and Materials Transactions, Vol. 27A, October, pp. 3241-3249, 1996.
  147. D. Lawrynowicz, J. Wolfenstine and E.J. Lavernia, “Grain Growth Mechanisms in a Ni3Al/Al2O3 Composite in the Presence of a Liquid Phase”, Materials Science and Engineering, A230, pp. 1-13, 1997.
  148. Y. Wu, L. Del Castillo and E.J. Lavernia, “Superplastic Behavior of Spray Deposited 5083 Al”, Metallurgical and Materials Transactions A, Vol. 28A, pp. 1059-1068, 1997.
  149. D.E. Lawrynowicz, B. Li and E.J. Lavernia, “Particle Penetration During Spray Forming and Co-Injection of Ni3Al + B/Al2O3 Intermetallic Matrix Composite”, Metallurgical and Materials Transactions B, Vol. 28B, pp. 877-897, 1997.
  150. J.-P. Delplanque, W.D. Cai, R.H. Rangel and E.J. Lavernia, “Spray Atomization and Deposition of Tantalum Alloys”, Acta Materialia, Vol. 45, No. 12, pp 5233-5243, 1997.
  151. S. Ho and E.J. Lavernia, “Investigation of Thermal Residual Stresses in Layered Composite Using Finite Element Method and X-ray Diffraction”, Metallurgical and Materials Transactions , Vol. 28B, pp. 969-978, 1997.
  152. B. Li, J. Wolfenstine, J.C. Earthman and E.J. Lavernia, “Compressive Creep Behavior of Spray Formed Gamma Titanium Aluminide”, Metallurgical and Materials Transactions A, Vol. 28A, No. 9, pp. 1849-1857, 1997.
  153. B. Li and E.J. Lavernia, “Analysis of Sieving Data in Reference to Powder Size Distribution”, Acta Materialia, Vol. 46, No. 2, pp. 617-629, 1998.
  154. J154. X. Liang, J. Wolfenstine A. Sickinger and E.J. Lavernia,  and “In-Situ Carburized Coating produced by Reactive Plasma Spraying Low Carbon Steel with Methane”, Materials Science and Engineering, Vol. A212, pp. 51-61, 1996.
  155. R. Perez, B. Huang,  and E.J. Lavernia, “Thermal Stability of Nanocrystalline Fe-10 wt.% Al Produced by Cryogenic Mechanical Alloying”, NanoStructured Materials, Vol. 7, No. 5, pp. 565-572, 1996.
  156. S. Ho and E.J. Lavernia, “Investigation of Thermal Residual Stresses in Spray Atomized and Deposited ?-TiAl using Finite Element Method”, Journal of Materials Synthesis and Processing, Vol. 3, No. 6, pp. 403-414, 1995.
  157. S. Ho and E.J. Lavernia, “The Effect of Ceramic Reinforcement on Residual Stresses during Spray Atomization and Co-Deposition of Metal Matrix Composites”, Scripta Metallurgica et Materialia, Vol. 34, No. 12, pp. 1911-1918, 1996.
  158. B. Li and E.J. Lavernia, “Spray Forming of ? Ti-Al”, Journal of Materials Synthesis and Processing “, Vol. 4, No. 1, pp. 35-41, 1996.
  159. N. Yang, S. E. Gunthrie, S. Ho and E.J. Lavernia, “High Pressure Spray Atomization of Pd-Rh Powders”, Journal of Materials Synthesis and Processing  Vol. 4, No. 1, pp. 15-22, 1996.
  160. M. Gupta and E.J. Lavernia, “Effect of Processing on the Microstructural Variation and Heat Treatment Response of a Hypereutectic Al-Si Alloy”, Journal of Materials Processing Technology, Vol. 54, pp. 261-270, 1995.
  161. Y. Wu and E.J. Lavernia, “Spray Synthesis of Superplastic Materials for Near-Net-Shape Manufacturing”, Atomization and Sprays, Vol. 7, pp. 115-122, 1997.
  162. M. Wu, J. Zhang, J. Lewandowski, W. Hunt and E.J. Lavernia, “Enhanced Fracture Toughness of a Layered 6061/SiCp DRA Material Produced by Spray Deposition”, Journal of Materials Synthesis and Processing  Vol. 4, No. 2, pp. 127-134, 1996.
  163. J163. R. Perez, H.G. Jiang, and E.J. Lavernia, “Grain Size Stability of Nanocrystalline, Cryomilled Fe-3 wt.% Al”, NanoStructured Materials, Vol. 9, pp. 71-74, 1997.
  164. M. Lau, R. Perez, H.G. Jiang, and E.J. Lavernia, “Synthesis and Characterization of Bulk Nanocrystalline M50 Tool Steel”, NanoStructured Materials, Vol. 9, pp. 157-160, 1997.
  165. M. Lau, B. Huang, R.J. Perez, J. Juarez-Islas, and E.J. Lavernia, “Synthesis of Nanocrystalline M50 Steel Powders by Cryomilling”, NanoStructured Materials, Vol. 7, No. 8, pp. 847-856, 1996.
  166. N. Yang, S.E. Gunthrie, S. Ho and E.J. Lavernia, “Solidification Behaviour of Pd-Rh Droplets during Spray Atomization”, Journal of Materials Science  32, pp.6589-6594, 1997.
  167. S. Ho and E.J. Lavernia, “The Effect of Heat Transfer Coefficient on Thermal Residual Stresses in Spray Deposited Materials”, Scripta Materialia, Vol. 36, No. 3, pp. 283-290, 1997.
  168. V.L. Tellkamp, M. Lau, A. Fabel, and E.J. Lavernia, “Thermal Spraying of Nanocrystalline Inconel 718”, NanoStructured Materials, Vol. 9, pp. 489-492, 1997.
  169. T. Hsieh, H. Choe, E.J. Lavernia, and J. Wolfenstine “Effect of Si3N4 on the Thermal Expansion Behavior of MoSi2”, Materials Science Letters, Vol. 30 Nos. 5-6, pp.407-410, April 1997.
  170. S. Anand, T.S. Srivatsan, Y. Wu and E.J. Lavernia, “Processing, Microstructure and Fracture Behavior of a Spray Atomized and Deposited Aluminum Silicon Alloy”, Journal of Materials Science  32, pp. 2835-2848, 1997.
  171. H. Jiang, M. Rühle and E.J. Lavernia, “On the Applicability of the X-Ray Diffraction Line Profile Analysis in Extracting Grain Size and Microstrain in Nanocrystalline Materials”, Journal of Materials Research , Vol. 14, No. 2, 1999.
  172. W.D. Cai and E.J. Lavernia, “Modeling of Porosity During Spray Forming”, Materials Science and Engineering A, pp. 8-12, 1997.
  173. N. Yang, S.L. Robinson, C.H. Cadden, S. Ho and E.J. Lavernia, “The Effect of Cooling Rate on the Segregation Behavior of Pd-Rh Droplets Processed by Spray Atomization”, Journal of Materials Synthesis and Processing, Vol. 4, No. 5, pp. 325-335, 1996.
  174. S.C. Lim, M. Gupta, Y.F. Leng and E.J. Lavernia, “Wear of a Spray Deposited Hypereutectic Aluminum-Silicon Alloy”, Journal of Materials Processing Technology  63, pp. 865-870, 1997.
  175. S.L. Dai, Y. Wu, L. Del Castillo and E.J. Lavernia, “Microstructure and Properties of Spray Deposited High Li Al-Li-Mg-Ge-Zr Alloys”, Scripta Materialia, Vol. 37, No. 3, pp. 265-270, 1997.
  176. Y. Zhou, Y. Wu, and E.J. Lavernia, “Process Modeling in Spray Deposition: a Review”, International Journal of Non-Eqilibrium Processing, Vol. 10, Issue 2, pp. 95-183, 1997.
  177. J.-P. Delplanque, E.J. Lavernia and R.H. Rangel, “Numerical Investigation of Phase Flow Induced Porosity Formation in Spray Deposited Materials”, International Journal of Non-Equilibrium Processing, Vol. 10, pp. 185-199, 1997.
  178. B. Li, N. Nordstrom and E.J.Lavernia, “Spray Forming of Zircaloy-4”, Materials Science and Engineering A237, pp. 207-215, 1997.
  179. B. Li and E.J. Lavernia, “Spray Forming and Co-Injection of Particulate Reinforced TeAl/TiB2 Composites”, Acta Materialia, Vol. 49, No. 12, pp. 5015-5030, 1997.
  180. J.A. Juarez-Islas, B. Campillo, R. Perez, S. Su and E.J. Lavernia, “Characterization of a Solid Solution of Cu in Al-Cu-SiCp Metal Matrix Composites Processed by Spray Atomization and Co-Deposition”, Journal of Materials Science  33, pp. 259-263, 1998.
  181. B. Li and E.J. Lavernia, “Spray Atomization and Deposition of Gamma Titanium Aluminide Alloys”, Journal of Materials Synthesis and Processing, Vol 5, No. 1, pp. 51-58, 1997.
  182. W.D. Cai, J. Smugeresky and E.J. Lavernia, “Low Pressure Spray Forming of 2024 Aluminum Alloy”, Materials Science and Engineering A241, pp.60-71, 1998.
  183. J.-P. Delplanque, S. Dai, R.H. Rangel and E.J. Lavernia, “Reactive Spray Atomization and Deposition of Aluminum Alloys: Microstructure and Dispersoid Characterization”, Journal of Materials Synthesis and Processing, Vol. 5, No. 1, 1997.
  184. H.G. Jiang, R.J. Perez, M.L. Lau and E.J. Lavernia, “Formation kinetics of nanocrystalline Fe-4 wt. %  Al solid solution during ball milling”, Journal of Materials Research, Vol. 12, No. 6, pp. 1429-1432, 1997.
  185. J. Zhang, R.J. Perez and E.J. Lavernia, “Damping Behavior of 6061Al/SiC/Gr Spray-Deposited Composites”, Standards for Materials, Products, Systems & Services, STP 1304, pp. 313-330, 1997.
  186. H. Choe, T. Hsieh, Y. Wu, E.J. Lavernia and J. Wolfenstine, “The Effect of Powder Processing on the Mechanical Behavior of MoSi2-10 Vol% Si3N4 Composites”, Journal of Materials Synthesis and Processing, Vol. 4, No. l4, pp. 235-243, 1996.
  187. Y. Zhou, S.W. Lee, V.G. McDonell, G.S. Samuelsen, R.L. Kozarek and E.J. Lavernia, “Characterization of Linear Spray Atomization and Deposition for Continuous Production of Aluminum Alloys”, Journal of Materials Synthesis and Processing, Vol. 5, No. 1, pp. 111-116, 1997.
  188. Y. Zhou, S.W. Lee, V.G. McDonell, G.S. Samuelsen, R.L. Kozarek and E.J. Lavernia, “Influence of Operating Variables on Average Droplet Size During Linear Atomization”, Journal of the International Institutes for Liquid Atomization and Spray Systems, Vol. 7, No. 4, pp. 339-358, 1997.
  189. W.D. Cai and E.J. Lavernia, “Numerical Simulation of Porosity Evolution During Spray Forming of Ta-2.5 wt% Fe”, Journal of Materials Synthesis and Processing, Vol. 5, No. 1, pp. 39-44, 1997.
  190. L. Martinez, O. Flores, M. Amaya, A. Duncan, S. Viswanathan, D. Lawrynowicz and E.J. Lavernia, “The Role of Alumina Particulate in Microstructural and Forging Properties of Spray-Atomized and -Deposited Fe-Al Ordered Intermetallic Compounds”, Journal of Materials Synthesis and Processing, Vol. 5, No. 1, pp. 65-76, 1997.
  191. J.L. Estrada, E. Nicolas and E.J. Lavernia, “Microstructure Characterization of Al-Ai and MMCS Preforms Processed by Spray Atomization and Deposition”, Journal of Materials Synthesis and Processing, Vol. 5, No. 1, pp. 77-85, 1997.
  192. T.S. Srivatsan, S. Anand, Y. Wu and E.J. Lavernia, “The Fatigue Response and Fracture Behavior of a Spray Atomized and Deposited Aluminum-Silicon Alloy”, Journal of Materials Engineering and Performance, Vol. 6, No. 5, pp. 654-663, 1997.
  193. W. Cai and E.J. Lavernia, “Modeling of Porosity During Spray Forming I.  Effects of Processing Parameters”, Metallurgical and Materials Transactions B, Vol. 29B, pp. 1085-1096, 1998.
  194. W. Cai and E.J. Lavernia, “Modeling of Porosity During Spray Forming II.  Effects of Atomization Gas Chemistry and Alloy Compositions”, Metallurgical and Materials Transactions B, Vol. 29B, pp. 1097-1106, 1998.
  195. Y. Zhou, S. Lee, V.G. McDonell, G.S. Samuelsen, R.L. Kozarek and E.J. Lavernia, “Characterization of Spray Atomization of 3003 Aluminum Alloy during Linear Spray Atomization and Deposition”, Metallurgical and Materials Transactions B, Vol. 29B, pp.793-806, 1998.
  196. Y. Zhou, S. Lee, V.G. McDonell, G.S. Samuelsen, R.L. Kozarek and E.J. Lavernia, “Size Distribution of Spray Atomized Aluminum Alloy Powders Produced during Linear Atomization”, Materials Science and Technology, Vol. 15, No. 1, 1999.
  197. X.D. Peng, A. Kharlov, V. Bystritski, E. Garate and E.J. Lavernia, “Characteristics of Material Surfaces Modified Using Plasma-Enhanced Ion Beams”, Materials Science and Engineering A 251, pp. 142-149, 1998.
  198. T. Hsieh, H. Choe, E.J. Lavernia and J. Wolferstine, “The effect of Si3N4 on the thermal expansion behavior of MoSi2”, Materials Letters 30, pp. 407-410, 1997.
  199. V. Bystritskii, E. Garate, V. Grigoriev, A. Kharlov, E.J. Lavernia and X. Peng,”Modification of materials surface using plasma enhanced ion beams”, Laser and Particle Beams, Vol. 6, No. 4, pp. 569-580, 1998.
  200. H.G. Jiang, M.L. Lau and E.J. Lavernia, “Grain Growth Behavior of Nanocrystalline Inconel 718 and Ni Powders and Coatings”, NanoStructured Materials, Vol. 10, No. 2, pp. 169-178, 1998.
  201. S.L. Dai, J.-P. Delplanque and E.J. Lavernia, “Microstructural Characterisitics of 5083 Al Alloys Processed by Reactive Spray Deposition for Net-shape Manufacturing”, Metallurgical and Materials Transactions A, Vol. 29A, pp.2597-2611, 1998.
  202. R.J. Perez, H.G. Jiang, C.P. Dogan and E.J. Lavernia, “Grain Growth of Nanocrystalline Cryomilled Fe-AL Powders”, Metallurgical and Materials Transactions A, Vol. 29A, pp. 2469-2475, 1998.
  203. M.L. Lau, H.G. Jiang, W. Nuchter,and E.J. Lavernia, “Thermal Spraying of Nanocrystalline Ni Coatings”, Solidi Status Physica, pp. 257-268, 1998.
  204. B. Huang, R.J. Perez, H. Hu and E.J. Lavernia, “Grain growth of nanocrystalline Fe-Al alloys produced by cryomilling in liquid argon and nitrogen”, Materials Science and Engineering A 255, pp. 124-132, 1998.
  205. L. Martinez, M. Amaya, J. Porcayo-Calderon and E.J. Lavernia, “High Temperature Electrochemical Testing of Spray Atomized and Deposited Iron Aluminides Alloyed with Boron and Reinforced with Alumina Particulate”, Materials Science and Engineering A 258, pp. 306-312, 1998.
  206. M.L. Lau, V.V. Gupta and E.J. Lavernia, “Mathematical Modeling of Particle Behavior of Nanocrystalline Ni during high Velocity Oxy-Fuel Thermal Spray”, NanoStructured Materials, Vol. 10, No.5, pp.715-722, 1998.
  207. M.L. Lau, E. Strock, A. Fabel, C.J. Lavernia and E.J. Lavernia, “Synthesis and Characterization of Nanocrystalline Co-Cr Coatings by Plasma Spraying”, NanoStructured Materials, Vol. 10, No.5, pp. 723-730, 1998.
  208. Y. Zhou, J.A. Juarez-Islas, O. Alvarez-Fregoso, W.Y. Yoon and E.J. Lavernia, “Microstructural Characterization and Solidification Behavior of Atomized Al-Fe Powders”, Journal of Materials Research, in press, 1998.
  209. S.L. Dai, J.-P. Delplanque and E.J. Lavernia, “Grain Growth in Reactive Spray Deposited 5083 Alloys”, Scripta Materialia, Vol. 40, No. 2, pp. 145-151, 1998.
  210. J210. J.-P. Delplanque, W.D. Cai, D. White and E.J. Lavernia, “Evaluating Porosity in Spray Deposited A2 Tool Steel”, International Journal of Powder Metallurgy, in press, 1998.
  211. Y. Zhou, J.A. Juarez-Islas and E.J. Lavernia, “Spray Atomization of Two Al-Fe Binary Alloys: Solidification and Microstructure Characterization”, Journal of Materials Science, in press, 1998.
  212. S.L. Dai, J.-P. Delplanque and E.J. Lavernia, “Effect of Secondary Phase Particles on Post-Recrystallization Grain Growth in Reactive Spray Deposited 5083 Al Alloys”, Journal of Materials Research, in press, 1998.
  213. Q. Xu, R.W. Hayes, W.H. Hunt, Jr. and E.J. Lavernia, “Mechanical Properties and Fracture Behavior of Layered 6061/SiCp Composites Produced by Spray Atomization and Co-Deposition”, Acta Materialia, in press, 1998.
  214. A.J. Melmed, N.C. Tambakis, M. Lau and E.J. Lavernia. “APFIM Study of Impurities in a Nanocrystalline Fe-Al Alloy”, Progress in Surface  Science, Vol. 59, pp. 313-321, 1998.
  215. V. Bystritskii, E. Garate, V. Grigoriev, A. Kharlov, E.J. Lavernia and X. Peng, “The high power pulsed ion-beam mixing of a titanium layer with an aluminum substrate”, Nuclear Instruments & Methods B 149, pp.61-66, 1998.
  216. Y. Zhou, J.A. Juarez-Islas, O. Alvarez-Fregoso, W.Y. Yoon and E.J. Lavernia, “Microsturctural Characterisation and Solidification Behavior of Atomised Al-Fe Powders”, Journal of Materials Research, in press, 1999.
  217. J. He, M. Ice and E.J. Lavernia, “Synthesis and Characterization of Nanostructured Cr3C2-NiCr”, NanoStructured Materials, Vol. 10, No. 8, pp.1271-1283, 1998.
  218. Z. Lin, E.J. Lavernia and F. A. Mohammed, “High-Temperature Deformation in a Ta-W Alloy”, Acta Materialia, in press 1999.
  219. L. Del Castillo, Y. Wu, H.M. Hu and E.J. Lavernia, “Microstructure and Mechanical Behavior of Spray Deposited High Li Al-Li Alloys”, Metallurgical and Materials Transactions,  in press 1999.
  220. H.G. Jiang, H.M. Hu and E.J. Lavernia, “Synthesis of Fe rich Fe-Al nanocrystalline solid solutions using ball milling”, Journal of Materials Research, in press, 1999.

Comments are closed.